Raptor Polymer Nylon Staples
1/2" (12.7mm) Crown
Fits Omer 81/P Nylon Stapler
Lengths available: 6mm, 10mm & 14mm
Codes: 81P/6, 81P/10, 81P/14
RAPTOR® composite upholstery staples firmly attach fabric to wood surfaces.
- Lumber wrap
- Lumber tagging
- Kraft pulping
- Fiberglass lay-up
- Composites manufacturing
- Radiant barrier installation
- House wrap
- Casket lining
- Casegoods tagging
- Cable and wire installation
SAW, SAND, CUT
Can be worked like wood: RAPTOR® fasteners can be cut, shaped and sanded with the wood without damaging bits, blades or abrasives.
Save time/labor: RAPTOR® fasteners can be left in and do not need to be removed. They will not rust, stain, delaminate or cause problems. RAPTOR® fasteners eliminate down-time.
Save money: RAPTOR® fasteners will save on bit, blade and abrasive damage and the down-time to replace bits, blades or abrasives from metal nail damage so manufacturing costs are reduced.
NO RUST, NO CORROSION
Won't deteriorate wood: The thermal conductivity of metal nails causes condensation of moisture at the surface of the nail which promotes corrosion and wood deterioration. RAPTOR® fasteners are similar to wood in their thermal conductivity, so they do not cause condensation, corrosion and wood deterioration.
Save time: RAPTOR® fasteners sand down with the wood and accept stain so there is no need to putty, saving one step in production and the appearance is better than putty.
No electrolysis or galvanic corrosion: RAPTOR® fasteners are completely non-metal and cannot rust, oxidize, corrode or cause galvanic corrosion of other metals.
BONDS LIKE GLUE
NATURAL BONDING: The shaft of the nail or staple fuses permanently with the material creating a powerful interfacial bond between the fastener and the material.
STRONG HOLDING POWER: Has twice the tensile holding power compared to similar sized steel fasteners.
HIGH QUALITY RESULTS: RAPTOR® creates a longer lasting, high quality end product.